ClassesCraft TechnologyTicker

STEAM: Make a Disco LED Anglerfish

In the article “STEAM: Make a Disco LED Anglerfish” by Jamie Hudson, you will learn how to recreate the natural bioluminescence of the ocean with the help of an LED light. This project involves making a fun anglerfish out of wood and incorporating electronics into the design. Jamie Hudson, a scientist and crafter, will guide you through the process of wiring an LED, cutting basswood with a Cricut, and painting the anglerfish. Not only will you have a unique and interactive piece of art, but you’ll also gain knowledge about bioluminescence and symbiosis. So get ready to channel your inner creativity and add a touch of disco to your anglerfish party!

STEAM: Make a Disco LED Anglerfish

This image is property of www.creativebug.com.

Materials Needed

Before you begin making your disco LED anglerfish, it’s important to gather all the materials you’ll need. Here’s a list of everything you’ll need to complete this project:

  • Cricut Maker
  • Computer or mobile device to access Design Space
  • Basswood for the Cricut
  • Cricut Knife Blade
  • Strong grip mat
  • 3V Coin battery CR2032
  • 3V Coin battery holder
  • Tri-Color RGB Auto Blinking Diffused LED
  • Acrylic paint in black, green, and white
  • Paint brushes
  • Scratch paper
  • Wood spring clothespin
  • Pipe cleaner
  • Super glue
  • Glue dots
  • Electrical tape
  • X-acto knife
  • Small pliers (optional but useful)

Make sure you have all these materials on hand before starting the project to ensure a smooth workflow.

Introduction

In this project, you’ll learn how to create a disco LED anglerfish using the Cricut Maker and some basic electronics. This fun and educational project will not only teach you about the process of creating an anglerfish, but also about bioluminescence and symbiosis.

Throughout the project, you’ll be guided by Jamie Hudson, a PhD scientist and crafter, who will provide insightful information on electronics and semiconductors. By the end of this project, you’ll have a beautiful and illuminated anglerfish that you can paint in different colors and use to throw a disco anglerfish party!

So let’s gather our materials and get started!

STEAM: Make a Disco LED Anglerfish

This image is property of www.creativebug.com.

Step 1: Gather Materials

The first step in creating your disco LED anglerfish is to gather all the necessary materials. Check the list provided in the previous section and make sure you have everything on hand. Once you have everything ready, you can move on to the next step.

Step 2: Set Up Cricut Maker

Now that you have all your materials ready, it’s time to set up your Cricut Maker. Make sure you have a computer or mobile device available to access Design Space, the software used to control the Cricut Maker.

Follow the instructions provided with your Cricut Maker to set it up and connect it to your computer or mobile device. Once you have everything set up, you’re ready to move on to the next step.

STEAM: Make a Disco LED Anglerfish

This image is property of images.pexels.com.

Step 3: Prepare Design Space

With your Cricut Maker set up and connected, it’s time to prepare your design in Design Space. Open Design Space on your computer or mobile device and create a new project.

In Design Space, you’ll find the SVG cutting file for the anglerfish provided by Jamie Hudson. Upload the file to Design Space and adjust the size and orientation of the anglerfish as desired.

Once you’re happy with the design, you can proceed to the next step to cut the basswood with your Cricut.

Step 4: Cut Basswood with Cricut

Now that your design is ready in Design Space, it’s time to cut the basswood with your Cricut Maker. Make sure you have the basswood securely placed on the strong grip mat and loaded into the Cricut Maker.

Follow the instructions provided by your Cricut Maker to cut the basswood according to the design in Design Space. Be patient and make sure to follow the instructions carefully to ensure a clean and precise cut.

Once the basswood is cut, remove it from the strong grip mat and set it aside for later assembly.

STEAM: Make a Disco LED Anglerfish

This image is property of images.pexels.com.

Step 5: Wire an LED

With the basswood cut and ready, it’s time to wire the LED for your anglerfish. Start by connecting the 3V Coin battery holder to the Tri-Color RGB Auto Blinking Diffused LED. Insert the 3V Coin battery into the holder to power the LED.

Next, use electrical tape to secure the LED and battery holder to the back of the anglerfish cutout. Make sure the LED is positioned in a way that the light will shine through the anglerfish’s lure.

Take your time to secure the wires and make sure everything is properly connected. Once you’re confident in the wiring, you can move on to the next step.

Step 6: Assemble Anglerfish

Now that the LED is wired and secured to the back of the anglerfish cutout, it’s time to assemble the anglerfish. Start by painting the front and sides of the anglerfish cutout with acrylic paint.

You can get creative with the colors you choose for your anglerfish. Remember, this is a disco anglerfish, so feel free to use vibrant and contrasting colors to create a fun and eye-catching design.

Once the paint is dry, use super glue or glue dots to attach the wood spring clothespin to the back of the anglerfish. This will serve as the anglerfish’s mouth and give it a three-dimensional look.

You can also use a pipe cleaner to create the anglerfish’s tail. Simply bend the pipe cleaner into the shape of a tail and attach it to the back of the anglerfish with super glue or glue dots.

Take your time to assemble the anglerfish and make sure everything is securely attached. Once you’re happy with the assembly, you can move on to the final step.

STEAM: Make a Disco LED Anglerfish

This image is property of images.pexels.com.

Step 7: Paint Anglerfish

The final step in creating your disco LED anglerfish is to paint the details on the anglerfish. Use acrylic paint in black, white, and green to add details such as eyes, teeth, and spots to your anglerfish.

Get creative with the painting process and add any additional details you’d like. You can use a small brush for fine details or try different painting techniques to achieve different effects.

Once the paint is dry, your disco LED anglerfish is complete! You can now turn on the LED and watch as your anglerfish lights up in a beautiful display of colors.

Conclusion

Congratulations on creating your very own disco LED anglerfish! Throughout this project, you’ve learned how to use the Cricut Maker, wire an LED, and assemble a three-dimensional anglerfish.

Not only did you create a beautiful anglerfish, but you also learned about bioluminescence and symbiosis along the way. Remember to have fun with your anglerfish and experiment with different colors and designs to make it truly unique.

Now that you’ve completed this project, you can continue exploring the world of STEAM by trying out more creative and educational projects. Keep learning and creating, and enjoy the magic of making!

Source: http://www.creativebug.com/classseries/single/steam-make-a-disco-led-anglerfish

LookCreativity

LookCreativity

Hello, We're Look, Creativity, the authors behind this vibrant website - Look, Creativity. Welcome to Your Lens to the Creative World! As an enthusiast of art and design, we're here to guide you through the captivating realm of creativity. With a keen eye for the latest trends and news, we curate inspiring content and present handpicked products specifically tailored for today's designers and creators.